WANTED AND FOR SALE

mike cooper · Post by **mike cooper** » Thu Mar 29, 2007 1:41 pm

NEARLY FINISHED MY NEW SWIFT,LOOKING TO BUY A SWIFT TRAILER,OR ONE
THAT I COULD MODIFY,ANYBODY HAVE ONE FOR SALE.? ALSO FOR SALE ARE THE
MOULDS FOR THE SWIFT,THESE ARE A COMPLETE SET OF PRODUCTION
MOULDS,HULL,INNER ,DECK,LOCKERS,SINK,ENGINE COVER,RUDDER PATTERN AND
BLADE,AND OTHER JIGS.ANY BODY INTERESTED,? phone me on 01953 681 578
or e mail me.regards to all mike

Post generated using Mail2Forum (http://www.mail2forum.com)

pm.purcell@W_iH1jslAvp... · Thu Mar 29, 2007 4:57 pm

Hi Mike, SBS made the trailer for our Swift & I contacted them re. spares etc. They still manufacture very close to the spec. Worth looking at them? SBS Wolverhampton.

Post generated using Mail2Forum (http://www.mail2forum.com)

michael cooper · Post by **michael cooper** » Fri Mar 30, 2007 7:35 pm

Thanks, trying to keep the costs down.!!but will bear it in mind .! how about you sell me yours, ? as you seem to keep it always in the water,? On an another issue, how do I get some progress photos onto the site,? al;though I am not a computer dummy, it seems complicated to load data onto the new site.?have been trying on and off for about two weeks to no avail , will ask my daughters boyfriend for help this week end, and see if this helps . ,have some good photos of build , rubbing srake, bow roller,and push,andpullpit,plus. all the deck fittings.!!!

"pm.purcell@N-EmcTAkUGIjNRGOg66M_01Eh3l44xhn9q3Avhduuxt7hGXfacX6IZYIauz7zUItc8V29rzfRmbgIZPL.yahoo.invalid" <pm.purcell@N-EmcTAkUGIjNRGOg66M_01Eh3l44xhn9q3Avhduuxt7hGXfacX6IZYIauz7zUItc8V29rzfRmbgIZPL.yahoo.invalid> wrote:

Hi Mike,
SBS made the trailer for our Swift I contacted them re. spares etc. They still manufacture very close to the spec. Worth looking at them? SBS Wolverhampton.

Inbox full of unwanted email? Get leading protection and 1GB storage with All New Yahoo! Mail.

Post generated using Mail2Forum (http://www.mail2forum.com)

pm.purcell@2t8eTtewcNp... · Fri Mar 30, 2007 9:07 pm

Hi Mike,I am refurbishing trailer this year, funds permitting, so that we can trail down to the Carrick Roads this summer. Never really meant to be this static, but the Broads are beguiling!As to photos... I found that I had to register on a photo site linked to the new site, this was the bit that I had not really understood at first. It was all a bit like blindly following the trail, but it worked in the end.I'm busy making a lightweight jib for sailing the rivers at the moment, could work... and will have cost about Â£60 which isn't bad.Look forward to seeing the new pics.Best wishes,Pauline

Post generated using Mail2Forum (http://www.mail2forum.com)

BRENDANTOWNSEND · Post by **BRENDANTOWNSEND** » Fri Mar 30, 2007 9:58 pm

mike
post some latest pics not seen any for a while.

Post generated using Mail2Forum (http://www.mail2forum.com)

Terrick Clare · Post by **Terrick Clare** » Sat Mar 31, 2007 10:23 pm

Hi Mike
Andy has just added a sort of idiots guide to uploading pics which
should help.
Terry

--- In Swift_18@yahoogroups.com, michael cooper <mikeprojectboat@...>
wrote:

Thanks, trying to keep the costs down.!!but will bear it in

mind .! how about you sell me yours, ? as you seem to keep it always
in the water,? On an another issue, how do I get some progress photos
onto the site,? al;though I am not a computer dummy, it seems
complicated to load data onto the new site.?have been trying on and
off for about two weeks to no avail , will ask my daughters boyfriend
for help this week end, and see if this helps . ,have some good
photos of build , rubbing srake, bow roller,and push,andpullpit,plus.
all the deck fittings.!!!

"pm.purcell@..." <pm.purcell@...> wrote: Hi Mike,
SBS made the trailer for our Swift I contacted them re. spares etc.

They still manufacture very close to the spec. Worth looking at them?
SBS Wolverhampton.

---------------------------------
Inbox full of unwanted email? Get leading protection and 1GB

storage with All New Yahoo! Mail.

Post generated using Mail2Forum (http://www.mail2forum.com)