We have had water in from the keel box when the boat has four adults on board. Recent work on the keel may have fixed this, I haven't checked yet. I guess the combination of mud suction & incoming tide could have an effect similar to the pressure of four folk aboard.
Post generated using Mail2Forum (http://www.mail2forum.com)
"whacker" still leaking!
-
- Making way
- Posts: 33
- Joined: Sun Mar 18, 2007 8:54 pm
- Location: Worcestershire
- Boat Name: Apus Melba
- Sail Number: K9202Y
"whacker" still leaking!
Yes found it to be caused by self tapping screws into Keel box to retain cover. - remove Drilled oy a little & refiberglassed no problems since
Elwyn Williams
email :- elwynjrwilliams@aol.com
Tel:
Home 01386 831471
Mobile +447762 600486 (MMS Enabled)
This e-mail contains information some or all of which may be legally privileged. It is for attention and use of the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, take any action on this e-mail. Internet communications are not secure and therefore the sender does not accept legal responsibility for the contents or attachments of this message.
Post generated using Mail2Forum (http://www.mail2forum.com)
Elwyn Williams
email :- elwynjrwilliams@aol.com
Tel:
Home 01386 831471
Mobile +447762 600486 (MMS Enabled)
This e-mail contains information some or all of which may be legally privileged. It is for attention and use of the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, take any action on this e-mail. Internet communications are not secure and therefore the sender does not accept legal responsibility for the contents or attachments of this message.
Post generated using Mail2Forum (http://www.mail2forum.com)
Elwyn Williams
-
- Making way
- Posts: 33
- Joined: Sun Mar 18, 2007 8:54 pm
- Location: Worcestershire
- Boat Name: Apus Melba
- Sail Number: K9202Y
"whacker" still leaking!
Yes found it to be caused by self tapping screws into Keel box to retain cover. - remove Drilled oy a little & refiberglassed no problems since
Elwyn Williams
email :- elwynjrwilliams@aol.com
Tel:
Home 01386 831471
Mobile +447762 600486 (MMS Enabled)
This e-mail contains information some or all of which may be legally privileged. It is for attention and use of the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, take any action on this e-mail. Internet communications are not secure and therefore the sender does not accept legal responsibility for the contents or attachments of this message.
Post generated using Mail2Forum (http://www.mail2forum.com)
Elwyn Williams
email :- elwynjrwilliams@aol.com
Tel:
Home 01386 831471
Mobile +447762 600486 (MMS Enabled)
This e-mail contains information some or all of which may be legally privileged. It is for attention and use of the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, take any action on this e-mail. Internet communications are not secure and therefore the sender does not accept legal responsibility for the contents or attachments of this message.
Post generated using Mail2Forum (http://www.mail2forum.com)
Elwyn Williams
-
- Anchored
- Posts: 6
- Joined: Sun Jul 29, 2007 9:47 pm
- Location: Cheshire
Flanged (plastic/poly) cups
Hi everyone,
I am planning to remove the keel when the boat is back on the trailer and was wondering if it is possible to purchase new flanged (plastisc/poly) cups which the keel bolt slides through? Has anyone had to replace them?
Thanks
Simon
I am planning to remove the keel when the boat is back on the trailer and was wondering if it is possible to purchase new flanged (plastisc/poly) cups which the keel bolt slides through? Has anyone had to replace them?
Thanks
Simon